Troubleshooting – Low system pressure

Probable Cause What to Do Compressor running in "Unload" Mode. Press "UNLOAD/LOAD" button. Controller off-line set point too low. Press "UNLOAD/STOP" button; set off-line set point at a higher value Dirty air filter element. Check filter condition. Replace as required. Air leak. Check air system piping. Moisture separator trap drain stuck open. Inspect and repair. Inlet valve not fully open. Inspect and repair. Check control system operation. System demand exceeds compressor delivery. Install larger or an additional compressor.

Use the link list above to access more online information about the best ways to solve compressed air system challenges. If the problem you’re having isn’t listed, please email us so we can add it. Our expert staff and technicians welcome the opportunity to help you solve problems with your compressed air system.